Tramex HYgro-i 2 Relative humidity probe with upgraded  RHIe2 interface cable

Tramex Hygro-i 2 accesory pack with plastic inserts for penetrative testing

Welcome to inspect   ex our yard Cardinham by appointment,This whole set is as new with the probes etc obviously being unused. The only fault to point out is that the small plastic tab securing the battery cover is broken buta two inch piece of sellotape makes a secure fix. 

Tramex CMEXpert II Concrete Moisture Meter (Digital)

The CMEXpert II from Tramex, is the digital displayed upgrade of the Concrete Encounter CME4 with optional to also measure Relative Humidity and moisture content in wood using pin probes (both require additional accessories). Meeting the standards of the current BS8201, 8203, 5325 & ASTM F2170, F2420 regulations, the CMEXpert II is able to measure the moisture content of concrete and other slabs without causing any damage.

With the large clear backlit digital display the meter can measure up to 6.9% moisture content in concrete with specific scales selectable for various meterial types. The meter works with the parallel co-planar electrodes that are mounted on the base that in test conditions transmit low-frequency signals into the concrete floor to give accurate and on-the-point moisture readings.

This meter also has the ability for other tests such as Relative Humidity, temperature, dew-point and mixing ratio readings with the Hygro-I probe attachment. The CMEXpert II measures RH using the optional Tramex HIPP1-IE Hygro-i ® probe (selectable above) which is most often used in conjunction with the Tramex RHIH Insulated hood that allows non-destructive surface measurements which negates the need to drill any holes. NOTE: The RHIH Insulated hood MUST be used in conjunction with the HIPP1-IE Kit. 

Applications / Materials:

• Qualitative moisture measurement in Concrete Slabs & Screeds, Screeds, Anhydrite/Gypsum Screeds & Boards, Stone/Tiles

• Relative humidity measurements with above materials using the attachable Hygro-i ® RH probe either by itself or with the RHIH Insulated hood

• Wood Moisture (with attachable pin-type probe HH14TP30).

• Ambient/Atmospheric Relative Humidity using the RH Short Probe or RH Long Probe 

Key features:

• Non-destructive moisture measurements of up to 6.9% in concrete.

• Large clear backlit digital display.

• Attaches to the optional relative humidity Tramex HIPP1-IE Hygro-i ® probe for in situ testing of concrete to international standards BS 8201, 8203, 5325 & ASTM F2170. 

• RH measurements made either using the RHIH Insulated hood for surface testing or using holes liners and caps.

• Hold function that “freezes” the meter measurement when inspecting areas where the CMEXpert II display is not visible.

• 7% to 40% Moisture Content measurement in wood using optional pin-type probe attachment. (optional Tramex HH14TP30)