-
Your shopping cart is empty!
Electrical
spares
Pumps &
Plumbing
-270x278.JPG)
General
Industrial
Twenty five years buying and selling machinery plant and Equipment
We sell old fashioned,still do deals on a handshake, tell the truth and are pleased to be very busy because of this
-200x200.JPG "SMS004 Photo Etch Bending Tool 5.5 inch Hold and Fold® THE 5 SPEED")
SMS004 Photo Etch Bending Tool 5.5 inch Hold and Fold® THE 5 SPEED
SMS004 Photo Etch Bending Tool 5.5 inch Hold and Fold® (THE 5 SPEED)
100% Made in the USA by The Small Shop®
5" Folding blade in safety case- $3.99 value included!
Gives extra clamping ability needed on longer photo etch
Two knobs allows Pass-thru for long parts (maximum slightly more than 3")
16 Bending Finger Options
Easy to handle in the hand or on the bench
Longer fingers for deeper working area
Excellent for work on any type or scale of Photo Etch
Preferred by Ship Builders, HO and O Scale Railroad Builders
Micro edges for finer more accurate folds when scratch building
Strong durable power wedges for scoreless thicker brass
Back straight edge can be used to assemble Fruil Tracks
Pre-Etch beams - Form Tie downs; clamp/ guards or angle beams
Pyramid finger design - enables 'fold-over' of U-shaped channels
Spring-loaded tool head rotates to put either face along the edge
Head & base are machined from aircraft grade aluminum
Head is hard anodized clear
Base is hard anodized black
Instructions, small blade and 5" folding tool included
Photos using the 5 Speed provided by Jose Brito
Not intended for use by children under the age of 14 years - use only with adult supervision
-200x200.JPG "SMS004 Photo Etch Bending Tool 5.5 inch Hold and Fold® THE 5 SPEED")
%20(5)-200x200.JPG "Inficon Sensistor XRS9012 Leak Detector with probe and charger ( read descrip)")
Inficon Sensistor XRS9012 Leak Detector with probe and charger ( read descrip)
Note Collection Only will not pack for third party courier
The Sensistor XRS9012 Hydrogen Leak Detector is a fast, reliable and robust instrument for utilities leak detection such as telecom cables and water pipes.
The Sensistor XRS9012 offers a highly sensitive and flexible leak detection system in a heavy-duty, smart and ergonomically designed package. The unique method involving the use of inexpensive forming gas (5% hydrogen and 95% nitrogen) as tracer gas, combines unparalleled locating properties with user-friendly technology, low costs and minimal service requirements.
To be able to detect both minor and major leaks the Sensistor XRS9012 features a sensitivity adjustor to instantly adapt to any detection condition. The electronic sensor mounted in the probe tip responds instantaneously to the tracer gas. The sensor is also highly sensitive and selective to hydrogen gas. Additionally, the instrument has a very short recovery time to enable new measurements to be performed immediately.
Features
Quick start up and automatic shut off when idle
Minimal service requirements
Adjustable sensitivity
Quick detection through high and adjustable sensitivity
Highly selective hydrogen sensor for reliable detection
Easy to carry and handle
Quick charging in the car (5 minutes for 20 minutes of operation)
Heavy-duty design and waterproof aluminum casing (IP55)
Proven method involving the use of inexpensive forming gas (5% hydrogen and 95% nitrogen) as tracer gas
No moving parts, almost maintenance-free
%20(1)-200x200.JPG "Inficon Sensistor XRS9012 Leak Detector with probe and charger ( read descrip)")
-200x200.JPG "Thermal printer hard wired 240v Tattoo copier/printer")
Thermal printer hard wired 240v Tattoo copier/printer
Model: ATS-100AMZ
Simple to use thermal hard wired tattoo stencil maker. New and unsed from our own stock originally purchased to make transfer prints for ceramics but abandoned that idea. Picture describes. Colllection only;
Carries serial number ATS-100AMZA038342 so we believe Ats is the manufacturer,, Date of mfr 2024.
Included power lead, unused machine, unused sample transfer papers.
-200x200.JPG "Thermal printer hard wired 240v Tattoo copier/printer")
-200x200.JPG "C.Scope SGA4 Signal Generator Dual-Frequency 33kHz & 131kHz High-Power Utility")
C.Scope SGA4 Signal Generator Dual-Frequency 33kHz & 131kHz High-Power Utility
From the shelves of a company we cleared , Boxed, New and unuseed opened by us only to inspect for completeness;
The C.Scope SGA4 Signal Generator is a high-performance transmitter engineered to boost the detection capabilities of the C.Scope CXL4 and C.Scope DXL4 locators. By applying a detectable signal to buried metallic services, it enables the tracing of utilities that do not naturally emit a signal, such as street lighting cables and small-diameter pipes. This device is essential for ensuring site safety and utility mapping accuracy in complex urban environments.
How does the dual-frequency output improve utility detection?
The SGA4 provides a simultaneous dual-frequency signal output of 33kHz and 131kHz, allowing operators to detect a wider array of utilities including those with higher electrical resistance. This dual-frequency capability ensures remarkable accuracy whether using a Signal Clamp or applying the signal via ground-level Induction.What application methods are supported by the SGA4?
The unit supports three distinct techniques: Direct Connection for precise tracing and depth measurement, Wraparound for effectively energizing street or car park lighting cables, and Induction for locating unknown metallic services. It features an adjustable One Watt Power Output to ensure signals can be effectively traced over longer distances and at greater depths.Is the SGA4 built for harsh construction environments?
Constructed with a durable twin-wall design, the SGA4 meets IP65 standards for protection against dust and water ingress, affirming its reliability on site. It includes a large detachable accessory tray for organized storage of leads and clamps, and requires no periodic calibration, reducing long-term maintenance requirements.| Frequency Output | Simultaneous 33kHz + 131kHz |
| Power Output | One Watt (Adjustable High/Low) |
| Signal Modes | Pulsed or Continuous Output |
| Environmental Rating | IP65 (Dust and Water Resistant) |
| Application Methods | Direct Connection, Induction, Wraparound |
| Calibration | No periodic calibration required Collection only will not pack for third party couriers |
-200x200.JPG "C.Scope SGA4 Signal Generator Dual-Frequency 33kHz & 131kHz High-Power Utility")
-200x200.JPG "Di-Log DLLEG1 K-Type Digital Thermometer Kit/ legionella testing kit")
Di-Log DLLEG1 K-Type Digital Thermometer Kit/ legionella testing kit
Selling as used, owned by us but kept as a spare on our refrigeration warehouse shelves so condition 100% A1
Di-Log DLLEG1 K-Type Digital Thermometer Kit:
Kit includes dual-input thermometer DL7101 with 2 K-type temperature probes (air liquid probe and KSP2 heavy duty surface probe), and 2 K-Type thermocouples. Supplied in durable carry pouch. Designed to take temperature measurements in hot water systems above 60°C, and below 20°C in cold water systems. KSP2 surface probe lead range -50 to 500°C.
Measures Air, Liquid & Surface Temperatures
Accurate to Celsius & Fahrenheit
Temperature Range -50°C to 1200°C
LCD Display
Data Hold Function
Manual Field Calibration
IP51: Not Water-Resistant
-200x200.JPG "Di-Log DLLEG1 K-Type Digital Thermometer Kit/ legionella testing kit")
-200x200.JPG "Diversitech GG1 Drain Gun Condensate AC Air Conditioning Cleaner CO2")
Diversitech GG1 Drain Gun Condensate AC Air Conditioning Cleaner CO2
DRAINGUN. New and unused- still sealed from our own refrigeration stores, outer packaging may be scruffy
Blocked drain line - no problem with our DrainGun™. This lightweight, portable tool is designed to unblock condensate drain lines and other pipework instantly. Simply insert a CO2 cartridge in to the DrainGun and with a press of the trigger, SWOOSH, 800 psi of food grade CO2 blows the blockage out.
-200x200.JPG "Diversitech GG1 Drain Gun Condensate AC Air Conditioning Cleaner CO2")
Schuco aluminium window systems 248874 limit stay restrictor Abs RH OW
|
Schuco detachable limiting stay with key RH, Genuine Schuco part, carries part number 248874 RH OW. Key to operate locking mechanism is included Mfr Spec detachable limiting stay with key -locks automatically. Opening width 100mm. Confirms to BS EN 14351-1 Picture describes actual iten, new and unused,, outer packaging may be scruffy |
ZE-NA22G Omron Industrial Automation Limit Switch , Roller Arm
One New and unused Onron industrial automation ZE- NA22G Roller arm Limit Switch.
These are new, outer boxes may be a little scruffy through storage,
Mfr Spec: E&OE
SWITCH, ROLLER ARM
Actuator Style : Roller Lever
Operating Force Max : 6.28N
Switch Operation : (Not Applicable)
Contact Voltage AC Max : 480V
Contact Voltage DC Max : 250V
Contact Current AC Max : 15A
Contact Current DC Max : 500mA
Switch Terminals : Screw
SVHC : Bis (2-ethylhexyl)phthalate (DEHP) (20-Jun-2013)
Actuator Type : Roller Arm Lever
Contact Configuration : SPDT
Contact Current Rating : 15A
External Depth : 25.4mm
External Length / Height : 44.5mm
External Width : 86mm
Fixing Centres : 25.4mm
IP / NEMA Rating : IP65
No. of Electrical Operations : 700000
No. of Mechanical Operations : 10000000
Operating Force : 3.43N
Operating Temperature Max : 80°C
Operating Temperature Min : -5°C
Pre-travel : 0.5mm
Series : ZE
Terminal Type : Screw
Thermal Current Rating : 15A
-200x200.JPG "Latching relay, ABB 2CSM531000R0201 E251 32/48, 1 pole")
Latching relay, ABB 2CSM531000R0201 E251 32/48, 1 pole
Latching relay, ABB 2CSM531000R0201 E251 32/48, 1 pole
Abb latching relay,
Carries part number 2CSM531000R0201
E251 32/48
48v ac / 24v dc32amp 1 pole.
New and Unused, we will decant from bulk packs for shipping
-200x200.JPG "Latching relay, ABB 2CSM531000R0201 E251 32/48, 1 pole")
243436 Schuco aluminium window hinge pairs right hand neutral base.
|
One pair 243436 RH aluminium genuine schuco window hinge, HINGE KIT 60 EV1 RH pair of neutral base and two opposite leaf Carries part number 243436 Picture describes. |
Cufflink findings with Gilt plated chain and tee bar Craft jewellery 500 pieces Bulk
Two hundred and fifty pair ( 500 pieces) Gilt plated metal tee bar with chain links attached for the manufacture of cuff-link etc. These are from our Bulldog clearance and only available from us. Excellent quality plate and everyone we have sold these to has been pleased with the quality We are unfortunately coming to the end of this particular clearance but with over 80,000 pieces sold we can reccomend these to you with confidence. These come with link of chain as pictured and see our other listings for split rings to suit.Bars are approx 18mm and chain 10mm
-200x200.JPG "Cufflink findings with Gilt plated chain and tee bar Craft jewellery 500 pieces Bulk")
5x Castors Twin Wheel Hafele M10 x 15mm Thread 50mm Dia With Brake Black
|
Fenmoormountain Machinery Division. We sell new, and used machinery, plant, small tools and surplus equipment. Five 50mm twin wheel braked castors with push/bolt M10 15mm thread length as per picture. Black plastic max load around 45 kilo per castor. Picture describes, these are new and unused but may be dusty through storage .
|
